12,174 research outputs found

    Wetting, roughness and flow boundary conditions

    Full text link
    We discuss how the wettability and roughness of a solid impacts its hydrodynamic properties. We see in particular that hydrophobic slippage can be dramatically affected by the presence of roughness. Owing to the development of refined methods for setting very well-controlled micro- or nanotextures on a solid, these effects are being exploited to induce novel hydrodynamic properties, such as giant interfacial slip, superfluidity, mixing, and low hydrodynamic drag, that could not be achieved without roughness.Comment: 28 pages, 14 figures, 4 tables; accepted for publication in Journal of Physics: Condensed Matte

    Hydrodynamic interaction with super-hydrophobic surfaces

    Full text link
    Patterned surfaces with large effective slip lengths, such as super-hydrophobic surfaces containing trapped gas bubbles, have the potential to reduce hydrodynamic drag. Based on lubrication theory, we analyze an approach of a hydrophilic disk to such a surface. The drag force is predicted analytically and formulated in terms of a correction function to the Reynolds equation, which is shown to be the harmonic mean of corrections expressed through effective slip lengths in the two principal (fastest and slowest) orthogonal directions. The reduction of drag is especially pronounced for a thin (compared to texture period) gap. It is not really sensitive to the pattern geometry, but depends strongly on the fraction of the gas phase and local slip length at the gas area.Comment: 20 pages, 7 figure

    Effective slip in pressure-driven flow past super-hydrophobic stripes

    Full text link
    Super-hydrophobic array of grooves containing trapped gas (stripes), have the potential to greatly reduce drag and enhance mixing phenomena in microfluidic devices. Recent work has focused on idealized cases of stick-perfect slip stripes, with limited guidance. Here, we analyze the experimentally relevant situation of a pressure-driven flow past striped slip-stick surfaces with arbitrary local slip at the gas sectors. We derive analytical formulas for maximal (longitudinal) and minimal (transverse) directional effective slip lengths that can be used for any surface slip fraction (validated by numerical calculations). By representing eigenvalues of the slip length-tensor, they allow us to obtain the effective slip for any orientation of stripes with respect to the mean flow. Our results imply that flow past stripes is controlled by the ratio of the local slip length to texture size. In case of a large (compared to the texture period) slip at the gas areas, surface anisotropy leads to a tensorial effective slip, by attaining the values predicted earlier for a perfect local slip. Both effective slip lengths and anisotropy of the flow decrease when local slip becomes of the order of texture period. In the case of small slip, we predict simple surface-averaged, isotropic flows (independent of orientation). These results provide a framework for the rational design of super-hydrophobic surfaces and devices.Comment: 10 pages, 4 figures, revised versio

    Wetting, roughness and hydrodynamic slip

    Full text link
    The hydrodynamic slippage at a solid-liquid interface is currently at the center of our understanding of fluid mechanics. For hundreds of years this science has relied upon no-slip boundary conditions at the solid-liquid interface that has been applied successfully to model many macroscopic experiments, and the state of this interface has played a minor role in determining the flow. However, the problem is not that simple and has been revisited recently. Due to the change in the properties of the interface, such as wettability and roughness, this classical boundary condition could be violated, leading to a hydrodynamic slip. In this chapter, we review recent advances in the understanding and expectations for the hydrodynamic boundary conditions in different situations, by focussing mostly on key papers from past decade. We highlight mostly the impact of hydrophobicity, roughness, and especially their combination on the flow properties. In particular, we show that hydrophobic slippage can be dramatically affected by the presence of roughness, by inducing novel hydrodynamic phenomena, such as giant interfacial slip, superfluidity, mixing, and low hydrodynamic drag. Promising directions for further research are also discussed.Comment: 36 pages, 19 figures. This chapter would be a part of "Nanoscale liquid interfaces" boo

    Generalized Density Matrix Revisited: Microscopic Approach to Collective Dynamics in Soft Spherical Nuclei

    Full text link
    The generalized density matrix (GDM) method is used to calculate microscopically the parameters of the collective Hamiltonian. Higher order anharmonicities are obtained consistently with the lowest order results, the mean field [Hartree-Fock-Bogoliubov (HFB) equation] and the harmonic potential [quasiparticle random phase approximation (QRPA)]. The method is applied to soft spherical nuclei, where the anharmonicities are essential for restoring the stability of the system, as the harmonic potential becomes small or negative. The approach is tested in three models of increasing complexity: the Lipkin model, model with factorizable forces, and the quadrupole plus pairing model.Comment: submitted to Physical Review C on 08 May, 201

    Light-cone sum rules for the NγΔN\gamma\Delta transitions for real photons

    Full text link
    We examine the radiative Δ→γN\Delta \to \gamma N transition at the real photon point Q2=0Q^2=0 using the framework of light-cone QCD sum rules. In particular, the sum rules for the transition form factors GM(0)G_M(0) and REMR_{EM} are determined up to twist 4. The result for GM(0)G_M(0) agrees with experiment within 10% accuracy. The agreement for REMR_{EM} is also reasonable. In addition, we derive new light-cone sum rules for the magnetic moments of nucleons, with a complete account of twist-4 corrections based on a recent reanalysis of photon distribution amplitudes.Comment: 34 pages, 9 figures, revised version, published in Phys. Rev. D, one misplaced reference correcte

    New nuclear three-body clusters \phi{NN}

    Full text link
    Binding energies of three-body systems of the type \phi+2N are estimated. Due to the strong attraction between \phi-meson and nucleon, suggested in different approaches, bound states can appear in systems like \phi+np (singlet and triplet) and \phi+pp. This indicates the principal possibility of the formation of new nuclear clusters

    Reevaluation of Neutron Electric Dipole Moment with QCD Sum Rules

    Full text link
    We study the neutron electric dipole moment in the presence of the CP-violating operators up to the dimension five in terms of the QCD sum rules. It is found that the OPE calculation is robust when exploiting a particular interpolating field for neutron, while there exist some uncertainties on the phenomenological side. By using input parameters obtained from the lattice calculation, we derive a conservative limit for the contributions of the CP violating operators. We also show the detail of the derivation of the sum rules.Comment: 33 pages, 5 figure
    • …
    corecore